| |
WH-900 DIGITAL TOROID WINDING MACHINE
WH-900 Digital Toroid Winding Machine adopts TWC-01 digital toroid
controller, it's an accurately and reliability digital toroid winding
machine.
- Collocate the Belt type winding head or Slider
type winding head to reduce the cost.
- Hi-tech shuttle for highest efficiency.
- Separate speed controls for loading and winding.
- Accurately count length of loading by limited-switch.
- Accurately count turns of winding by photo-electricity
sensor.
- Programmable winding direction, winding returns
range (Turns or Angle) and segment winding angle.
- Accurately wire spacing by programmable controller.
- Memory capacity accommodates 999 sequences
of parameters with off-power memory retention.
Specification:
- SPEED: 1500rpm
- WINDING MOTOR: 300W Brushless Motor
- SPREAD MOTOR: Stepping Motor
- MEMORY CAPACITY: 999 Steps
- POWER SOURCE: AC220V +10%, 50/60
Hz
| HEAD
TYPE |
B4
BELT TYPE |
B6
BELT TYPE |
S4
SLIDER TYPE |
S6
SLIDER TYPE |
| PICTURE |
 |
 |
 |
 |
| COIL O.D. |
5~60mm |
8~60mm |
8~60mm |
8~60mm |
| MIN.FIN. I.D. |
3mm |
6mm |
7mm |
7mm |
| MAX. HEIGHT |
25mm |
45mm |
25mm |
45mm |
| WIRE SIZE |
0.12~0.8mm |
0.25~0.9mm |
0.05~0.35mm |
0.05~0.4mm |
| SHUTTLE DIAMETER |
100mm |
150mm |
100mm |
150mm |
| SHUTTLE
WIDTH |
2.4, 2.5, 2.8, 3.4
4.7, 6.3, 7.9, 9.5 |
4.7, 6.3, 7.9
9.5,12.7, 15.6 |
4.7, 6.3, 7.9, 9.5 |
4.7, 6.3, 7.9
9.5,12.7, 15.6 |
| Min. Finished I.D. Will be different
by shuttle size and coil height. |
WH-900-T6 6" DIGITAL TOROID TAPING
WINDING MACHINE
Specification:
|
Coil OD |
60 mm (Max) |
|
Finish ID |
15 mm (Min) |
|
Coil Height |
45 mm (Max) |
|
Tape Width |
4 - 10 mm
(Depends on the width
of shuttle) |
|
Shuttle Diameter |
150 mm |
|
Max Speed |
300 RPM |
|
Main Motor |
1/2 HP DC Motor |
|
Spread Motor |
Stepping Motor |
|
Memory Capacity |
999 Step |
|
Power Source |
220V
±
10% ; 50 / 60 Hz |
|
Net Weight |
90 KGS |
|
Packing Dimension |
78 X 78 X 125 mm |
Toroid Sample:
WH-900A DIGITAL TOROID WINDING MACHINE
WH-900A Digital Toroid Winding Machine adopts
TWC-01 digital toroid controller, it's an accurately and reliability
digital toroid-winding machine.
Specification:
- MAX. SPEED: 1200rpm
- WINDING MOTOR: 300W Brushless Motor
- SPREAD MOTOR: Stepping Motor
- MEMORY CAPACITY: 999 Steps
- POWER SOURCE: AC220V +10%, 50/60
Hz
- DIMENSION: 77x69x55(cm)
- NET WEIGHT: 80KGS
| HEAD
TYPE |
B8
BELT TYPE |
S8
SLIDER TYPE |
| PICTURE |
 |
 |
| COIL O.D. |
40~120mm |
40~120mm |
| MIN.FIN. I.D. |
12mm |
15mm |
| MAX. HEIGHT |
80mm |
80mm |
| WIRE SIZE |
0.3~1.1mm |
0.3~0.8mm |
| SHUTTLE DIAMETER |
220mm |
220mm |
| SHUTTLE
WIDTH |
8, 10, 12, 15, 17, 20 |
8, 10, 12, 15, 17, 20 |
| Min. Finished I.D. Will be different
by shuttle size and coil height. |
WH-300 GEAR TYPE DIGITAL
TOROID WINDING MACHINE
WH-300 Gear type Digital Toroid Winding / Taping Machine adopts
TWC-01 digital toroid controller, it's an accurately and reliability
digital toroid winding / taping machine.
Specification:
- MAX. SPEED: 250 rpm
- WINDING MOTOR: 1/2HP DC Motor
- SPREAD MOTOR: Stepping Motor
- MEMORY CAPACITY: 999 Sequences
- POWER SOURCE: 220V +10%, 50/60
Hz
| HEAD
TYPE |
G10S
WINDING |
G10B
WINDING |
G13
WINDING |
T10S
TAPING |
T10B
TAPING |
T13
TAPING |
| PICTURE |
 |
|
 |
 |
|
 |
| COIL O.D. |
40~150mm |
60~150mm |
80~250mm |
40~150mm |
60~150mm |
80~250mm |
| MIN.FIN. I.D. |
25mm |
35mm |
45mm |
25mm |
35mm |
45mm |
| MAX. HEIGHT |
80mm |
80mm |
120mm |
80mm |
80mm |
120mm |
| WIRE SIZE |
0.5~1.5mm |
0.5~2.2mm |
0.5~2.6mm |
- |
- |
- |
| SHUTTLE DIAMETER |
250mm |
250mm |
350mm |
250mm |
250mm |
350mm |
| SHUTTLE
WIDTH |
8, 12,
16, 20, 25 |
8, 12,
16, 20, 25 |
11, 14, 17
20, 23, 26 |
TAPE WIDTH
4~8mm |
TAPE WIDTH
8~15mm |
TAPE WIDTH
12~25mm |
| Min. Finished I.D. Will be different
by shuttle size and coil height. |
Toroid Sample:
|
ITEM
|
1
|
2
|
3
|
4
|
5
|
6
|
|
PICTURE
|
|
|
|
|
|
|
|
SUIT MACHINE
|
WH-900-B6
|
WH-300-G10S
WH-300-T10S
|
WH-900A-S8
|
WH-300-G10S
|
WH-300-G10B
|
WH-900-B6
|
|
ITEM
|
7
|
8
|
9
|
10
|
11
|
12
|
|
PICTURE
|
|
|
|
|
|
|
|
SUIT MACHINE
|
WH-900-B8
|
WH-900-B6
|
WH-900-S6
|
WH-900-B4
|
WH-900-S4
|
WH-900-B4
|
WH-300-G7 GEAR TYPE DIGITAL
TOROID WINDING MACHINE
WH-300-G7 gear type toroid winding machine was designed for
winding small coil with precise winding requirement.
 
Specification:
|
Model |
WH-300-G7 |
|
Coil OD |
28 – 80 mm |
|
Finished ID
|
15 mm (MIN) |
|
Coil Height |
45 mm (MAX) |
|
Shuttle DIA. |
175 mm |
|
Max Speed |
300 Rpm |
|
Main Motor |
1/2HP DC
Motor |
|
Spread Motor |
Stepping
motor |
|
Memory
Capacity |
999 Steps |
|
Power Source |
220V
±
10%; 50 / 60 Hz |
Coil Sample:
 
|
|
