| |
WH-76x HIGH SPEED WINDING
MACHINE
WH-76x Series digital coil winding machine are digital programmable
high-speed coil winding machine, there are four models: one spindle,
two spindles, three spindles and four spindles. It's the highest
efficiency equipment.
- Microprocessor design, easy for program-setting.
- Stepping motor driven by constant-current power
supply,, high spreading speed precise winding.
- "Start Point" could set by key panel
or with teachable function. Display will show the position of
spreading head while setting.
- Wire spreading by nozzle type spreading head.
- Wire passing through ceramic rollers prevent
enamel from high temperature.
- Multiple spindles winding synchronal for highest
efficiency.
- Foot-switch connection for better efficiency.
- Speed control foot
pedal as option of machine.
- Winding parameters and options can be set independently for each step.
- Memory capacity accommodates 999 steps
of parameters with off-power memory retention.
Specification:
| MODEL |
WH-761
|
WH-762
|
WH-763
|
WH-764
|
| SPINDLES |
1
|
2
|
3
|
4
|
| WIRE SIZE |
0.03~0.6mm(Depends on Tension & Nozzle)
|
| SPREAD PITCH |
0~9.999mm
|
| SPREAD WIDTH |
100mm(Max.)
|
| COIL DIAMETER |
100mm(Max.)
|
| MAIN MOTOR |
Brushless Motor
|
| SPREAD MOTOR |
Stepping motor
|
| MAX. SPEED |
6000rpm
|
| MEMORY |
999 Sequences
|
| POWER SOURCE |
AC220V +10%, 50/60 Hz
|
| DIMENSION (CM) |
45x67x100
|
50x67x100
|
75x67x100
|
100x67x100
|
| NET WEIGHT |
45
|
50
|
55
|
60
|
Tension & Nozzle for
WH-761~764 & WH-800i
| TENSION |
TYPE
A |
TYPE
B |
TYPE
C |
| PICTURE |
.jpg) |
|
|
| NOZZLE SIZE |
0.3mm, 0.5mm |
0.3mm, 0.5mm, 0.8mm |
0.3mm, 0.5mm, 0.8mm |
| WIRE SIZE |
0.03mm~0.25mm |
0.06~0.4mm |
0.3~0.6mm |
WH-800 TRANSFORMER WINDING
MACHINE
WH-800 digital coil winding machine is digital
programmable coil winding machine, there is insulation tape device
and margin tape device with the machine. It's the best choice
for winding transformer.
- Feeder head of WH-800 can install four different
wire size at the same time.
- Winding and taping can be done by one machine.
- Stepper motor driven by constant-current power
supply, high spreading speed precise winding.
- "Start Point" could set by key panel
or with teachable function. Display will show the position of
spreading head while setting.
- Wire spreading by nozzle type spreading head.
- Wire passing through ceramic rollers prevent
enamel from high temperature.
- Foot-switch connection for better efficiency.
- Speed control foot
pedal as option of machine.
- Winding parameters and options can be set independently
for each step.
- Memory capacity accommodates 999 steps
of parameters with off-power memory retention.
Specification:
| MODEL |
WH-800
|
WH-800 ( I )
|
| SPINDLES |
1
|
2
|
| WIRE SIZE |
0.08~1.0mm
|
0.03~0.6mm
|
| SPREAD PITCH |
0~9.999mm
|
| SPREAD WIDTH |
100mm(Max.)
|
| COIL DIAMETER |
110mm(Max.)
|
| MAIN MOTOR |
Brushless Motor
|
| SPREAD |
2-Phase Stepping Motor
|
| MAX. SPEED |
6000rpm
|
6000rpm
|
| MEMORY |
999 Steps
|
| POWER |
AC220V +10%, 50/60 Hz
|
| DIMENSION (CM) |
76x68x72
|
76x68x72
|
| NET WEIGHT |
37
|
37
|
Tension & Nozzle
for WH-761~764 & WH-800i
| TENSION |
TYPE
A |
TYPE
B |
TYPE
C |
| PICTURE |
|
|
|
| NOZZLE SIZE |
0.3mm, 0.5mm |
0.3mm, 0.5mm, 0.8mm |
0.3mm, 0.5mm, 0.8mm |
| WIRE SIZE |
0.03mm~0.25mm |
0.06~0.4mm |
0.3~0.6mm |
Optional Accessory:
| ITEM |
ALCOHOL
BATH |
SPECIAL
JIG |
| PICTURE |
|
|
WH-75x HIGH-TORSION WINDING
MACHINE
High-Torsion Series digital coil winding machine is digital programmable
coil winding machine with brushless DC motor. The maximum wire size
can reach 3.0mm. It's the best choice for secondary winding.
- Microprocessor design, easy for program-setting.
- Stepper motor driven by constant-current power
supply,, high spreading speed precise winding.
- "Start Point" could set by key panel
or with teachable function. Display will show the position of
spreading head while setting.
- Wire passing through ceramic rollers prevent
enamel from high temperature.
- Multiple spindles winding synchronal for highest
efficiency.
- Foot-switch connection for better efficiency.
- Speed control foot
pedal as option of machine.
- Winding parameters and options can be set
Specification:
| MODEL |
WH-751
|
WH-752
|
| SPINDLES |
1
|
2
|
| WIRE SIZE |
0.5~3.0mm
|
0.5~1.6mm |
| SPREAD PITCH |
0~9.999mm
|
| SPREAD WIDTH |
300mm
|
100mm |
| COIL DIAMETER |
200mm
|
110mm |
| MAIN MOTOR |
Brushless DC Motor
|
| SPREAD MOTOR |
Stepping Motor
|
| MAX. SPEED |
1600 / 400rpm
|
3000 rpm |
| MEMORY |
999 Steps
|
| POWER SOURCE |
AC220V +10%, 50/60 Hz
|
| DIMENSION (CM) |
70x52x60
|
70x52x60
|
| NET WEIGHT |
42kgs
|
44kgs
|
WH-751G
LONG TRAVERSE
WINDING
MACHINE
  Specification:
Model
|
WH-751G
|
Wire Size
|
0.5 – 2.0mm |
|
Spread Pitch |
0.001 – 9.999mm |
|
Winding Width |
700mm (Max) |
|
Coil Diameter |
200mm (Max) |
|
Main Motor |
Brushless motor |
|
Spread Motor |
Stepping motor |
|
Winding Turns |
9999.9 turns |
|
Max. Speed |
3000 rpm (Max) |
|
Memory |
999 Operations |
|
Power Source |
AC 220V, 50 / 60 Hz |
Application:
Long traverse suitable for
winding heater, spring, antenna coils...etc.
Coil Sample:
|
ITEM
|
1
|
2
|
3
|
4
|
5
|
6
|
|
PICTURE
|
|
|
|
|
|
|
|
SUIT MACHINE
|
WH-751
|
WH-751
WH-752
|
WH-751
WH-752
|
WH-800
|
WH-76x
WH-800
|
WH-76x
WH-800
|
|
ITEM
|
7
|
8
|
9
|
10
|
11
|
12
|
|
PICTURE
|
|
|
|
|
|
|
|
SUIT MACHINE
|
WH-800
|
WH-76x
|
WH-740
WH-76x
|
WH-76x
WH-800
|
WH-76x
WH-800
|
WH-800
|
|
|
